Obs Sound Over and Over Again
LiveStream: PC Users Only. Send DAW Main Audio Output to OBS with ReaStream Vst Plug-in
Beginning, brand sure this is the right article. You only need to follow these steps if the following is true:
- The device you're going to LiveStream on is a PC computer or PC laptop. (Practise not do this if you are using a MAC reckoner).
- Y'all plan to apply a DAW recording software (such as Pro Tools, Ableton, Reaper, etc. (You don't need to practice this if you aren't going to use a DAW).
- Expect, what'due south a DAW?
- Y'all already successfully downloaded and installed the ReaStream Vst Plug-in every bit previously instructed in your Tech Rider.
- If y'all accept not done this step yet, stop and Click Here to complete that stride.
OK, Here We Go!
Two things must exist completed in order for your DAW Principal Jitney (Master Output Channel) to connect to OBS correctly, as follows:
Part i:
Add ReaStream Vst Plug-in to the Fx on the Master Passenger vehicle of your DAW.
Office 2:
Setup OBS Studio to receive the Mast Jitney output from your DAW.
PART 1: Add ReaStream Vst Plug-in to the Fx on the Principal Passenger vehicle of Your DAW
This next step ensures that the correct ReaStream Vst plug-in is inserted properly into the Fx of your DAW'south Mast Bus (aka Primary Output Aqueduct).
If you forget to practice this, or practice this improperly, the Master Audio Output from your DAW won't be received in OBS Studio and you lot and your fans won't exist able to hear what is beingness played in your DAW for backtracks, beats, etc.
- Open your DAW software (Reaper, Pro Tools, Ableton, etc).
- Open the exact project you're going to apply in your DAW for your LiveStream. You can use an existing project or create a new 1.
- Insert the correct plug-in:
- In your DAW, click on the "Fx" on the Master Bus (likewise known every bit Chief Output Aqueduct).
- Click "Add" in the FX: Master Rail popular-up window.
- Click on the "Cockos" nested beneath the "All Plugins."
- Double click the Right plug-in, information technology must be named exactly as beneath and be the (ReaPlugs Edition) (x86) (Cockos) version. Do non mistakenly insert the wrong plug-in.
- VST: ReaStream (ReaPlugs Edition) (x86) (Cockos)
- The plug-in window will appear, select "Send Audio/MIDI. IP." radio button.
- Select the "Local Circulate" from the dropdown.
- Click the "ten" in the top right of this plugin window to close information technology.
Of import LAST Stride!
To VERIFY y'all've done this correctly, click "Fx" again on the Master Motorcoach and you should see this verbal plug-in now actualization in the window.
DOUBLE CHECK: This plug-in you lot just inserted must be the VERY Last listed plug-in in the Main Bus (aka Master Output Channel) list, or else it won't work correctly.
Yous tin drag upwardly or down the plug-ins in that list to ensure this plug-in is listed at the very bottom of all other plug-ins.
Make Sure to Save the DAW Project Correctly
It's of import to empathise that by saving this DAW project yous but inserted this plug-in into, information technology will save everything y'all just did – for this I Projection Only.
And so later when you open up this projection, these steps are already washed.
But if you do more LiveStream performances in the future, call back that you either need to do these steps again – OR what nosotros recommend is making a "LiveStream Project" template with these settings so that on futurity LiveStreams y'all are just copying over this existing projection with the correct plug-in settings.
At present that your DAW is setup correctly for LiveStream, later on in your Tech Passenger at MyAfton.com, nosotros'll teach y'all how to setup OBS Studio to receive the principal sound output from your DAW.
PART 2: Setting Up OBS Studio to Receive Master Channel Output from Your DAW
In Part 1 above, you setup the correct Vst Plug-in then your DAW now has the ability to ship the Master Channel Output to OBS Studio.
Hither in Office 2, you need to at present setup OBS Studio to be able to receive that Master Channel Output from your DAW.
- Open OBS Studio. (at this point you lot should already have it installed)
- Under the SOURCES Box, click the "+" button to add together a source. Sources is located in the bottom left of the main window in the lower toolbar surface area.
3. Later on clicking the "+" in Sources, a card appears. Select "Sound Input Capture" from that menu.
4. A window pops upwards, select the radio button "Create new," and in the field below information technology, rename information technology to be chosen "DAW" (instead of the default text that appears in that field Audio Input Capture). Keep the "Make Source Visible" check boxed equally checked/on. And so click OK.
5. At present in this window yous'll see Device: with a drop down. Choose "Default" and click OK. Now you'll see the newly named "DAW" in the SOURCES section on OBS.
6. At present click the GEAR ICON for the "DAW" Sound Mixer to the right of it's book command. Make sure to click the gear icon for the "DAW" not for the Mic/Aux.
7. One time you click the right Gear Icon for the DAW in Audio Mixer section, a driblet down appears. Select "Filters" from that drop down.
8. In Audio Filters pop upward, click the "+" push button in bottom left corner to add a Filter.
9. In the drop down choose "VST ii.x Plug-in"
10. Now in the driblet down menu, choose the right plugin: reastream
If information technology's non appearing, information technology means you installed it incorrectly to the incorrect destination folder.
Don't close this popular upward, we're now going to do a test.
How to Do a Test to Ensure Proper Connection
If you completed Part ane and Function 2 information technology should now work. Merely we want to test it to be sure. To do this test you lot need to be in the Audio Filters popular upward window of OBS Studio.
If you're not there already, click the gear icon to the right of the DAW audio mixer and choose Filters from the dropdown.
1. Click the "Open in plugin interface" button below the dropdown to open the plugin then nosotros can do a test.
2. Now go back into your DAW software and open the LiveStream project that you already inserted the ReaStream Vst Plug-in for.
3. Arrange your DAW window and OBS Studio window so they are side by side and yous tin can encounter both. Resize your windows and so you can run across both.
iv. So click play on your DAW project, and verify the signal is actually passing through to OBS Studio. You know if it'southward working if the plugin window that's open in OBS is showing betoken in the volume meters.
5. Adjust the levels so that you're not peaking in your DAW and you're not peaking in OBS Studio.
That's it, if sound is passing through to OBS Studio so you've properly gear up everything up.
How to Audio Bank check for Your LiveStream Offline with Your DAW
We reccomend that you lot record yourself, thirty-threescore seconds, from inside your DAW. All of the audio will exist coming out of your DAW Chief Channel Output. So you lot can create the tracks for any live vocals or live instruments that will be performed live, those will run through your DAW in add-on to any backing tracks or beats that are in your DAW project.
Once you record 30-60 seconds of your offline sound check through your DAW you can listen back, mix information technology, put furnishings on, etc. You tin make information technology sound exactly how yous want information technology to sound. Recollect, whatever it sounds like, is what information technology volition sound like to fans when you LiveStream.
The beauty of this setup is, you tin can spend every bit much fourth dimension as you lot desire mixing and settings up the levels, offline, well before your actual LiveStream gig. This takes the pressure off, you lot tin can dial in everything perfectly way ahead of fourth dimension so that when it'due south time to enter the Greenish Room of your MyAfton.com account 30 minutes prior to your show beginning fourth dimension – you lot won't have any problems.
If yous properly sound check offline, and then when y'all enter your MyAfton Greenish Room xxx minutes prior to show beginning time, all you have to practice is simply verify your stream connectedness and connectedness speeds. Your mix will already exist done and sound exactly how you want it to sound.
Source: https://myafton.com/help/pc-users-daw-output-to-obs/
0 Response to "Obs Sound Over and Over Again"
Post a Comment